| Serial number | Fault phenomenon | cause | Method of exclusion |
| 1 | Filter Plate section Running between | 1. Lack of oil pressure 2. Filter plate sealing surface with debris 3. The filter cloth is not flat and folded 4. Feed pump pressure is too high 5. Feed pump pressure flow is high | See number 3 Clean the sealing surface Finishing filter cloth Properly open the return valve readjust |
| 2 | Unclear filtrate | 1. Damaged filter cloth 2. Improper selection of filter cloth 3. Filter cloth opening is too large 4. Filter cloth bag stitching opening line | Check and replace the filter cloth Redo the experiment and replace the filter cloth Replace filter cloth Re-engage |
| 3 | Lack of oil pressure | 1. Improper or damaged relief valve 2. Oil leakage inside the valve 3. Cylinder seal wear 4. Leakage outside the pipeline 5. Electromagnetic reversing valve is not in place 6. Piston pump damage 7. Not enough oil level | Re-adjust or replace Adjustment or replacement Replace the seal Repair or replace Cleaning or replacement replace Come on |
| 4 | Filter section Lift up | 1. Improper installation foundation 2. The slag removal on the filter plate is not clean 3. Ball pad offset in half ring | Revise the foundation Slag removal Adjust the lower half adjustment screw |
| 5 | Main beam bending | 1. Roughness of the foundation of the cylinder end is not enough 2. Filter plates are not aligned | re-install Arrangement filter plate |
| 6 | Filter plate rupture | 1. Feed pressure is too high 2. Feed temperature is too high 3. Filter plate feed hole blocked 4. Feeding speed is too fast 5. Damaged filter cloth | Adjust feed pressure Change the high temperature plate or cool before filtration Unblock the feed hole Reduce feed rate Replace filter cloth |
| 7 | Do not hold pressure | 1. There is a leak in the oil circuit 2. Piston seal wear 3. Hydraulic control check valve failure 4. Safety valve leak | Check the oil circuit replace Clean or replace with kerosene Clean or replace with kerosene |
| 8 | Cylinder does not work | 1. Inadequate oil level 2. Motor reversal 3. Oil pump damage | Come on Change direction replace |
| 9 | The cylinder is only pressed and does not retreat or only retreats without pressing | 1. Electromagnetic reversing valve coil burned 2. Spool stuck 3. Relay damage | Repair or replacement Cleaning valve replace |
| 10 | Contactor, relay, button and other components are faulty | 1. Poor contact 2. Solenoid damage 3. Electrical circuit failure | Repair contacts or replace replace Check line |
October 27, 2022
July 20, 2023
March 23, 2023
A plate and frame filter press is a commonly used sludge treatment equipment. Different manufacturers produce plate and frame filter presses with different degrees of automation and different sludge...
About Kurita, the technology leader in filter presses ---- (I) Kurita Machinery offers unique products and technology to the world as the founder of automatic filtration systems. YoshinaoKurita -...
Kurita: A leader in filter press technology As a specialist manufacturer of filter presses, can you give us your opinion on monozukuri? What does it mean to you and your company, and what are the...
Filter Press Market|Innovative Business Opportunities： The global filter press market size is estimated at USD 2,143.9 million in 2021 and is expected to reach USD 2,976.7 million by 2028, growing at...
Email to this supplier
October 27, 2022
July 20, 2023
March 23, 2023
Send Inquiry
Ms. Ada
Tel:0086-13544177648
Fax:0755-81781055
Mobile Phone:8613544177648
Email:ada@hongfafilterpress.com
Address:NO.3 Aoxiang Road, Zhangbei Second Village, Ailian, Longgang District, Shenzhen,, Shenzhen, Guangdong
Related Products List
Mobile Site
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
